|
Linear Roller Bearing A linear recirculating roller bearing and guideway assembly RUE. D consists of at least one carriage RWD. D on a guideway TSX. D. The unit has a full complement rolling element system which is preloaded as standard. The linear recirculating roller bearing and guideway assembly can take loads from all directions and moments about all axes. The essential features of RUF. D are
- Improved lubrication
- Lubricant distributor specially designed for grease
- Lubricant distributor specially designed for oil
- Minimal quantity lubricant metering unit (special accessory)
- Guideways and carriages optimized using systematic defrormation analyses.
- Recirculation channels for rolling elements produced by injection moulding
- No transitions in the recirculation channels.
- Rational separation of function parts.
- Saddle plate and recirculation channels: rolling bearing
- End piece: lubrication and sealing
- Looking element for increased rigidity (special accessory)
- Damping carriage RUDS. D
Linear receivulating roller bearing and guideway assemblies RUE. D can only be ordered as preassembled units. Supplementary technical information When selecting a monorail guidance system, the technical principles must also be taken into consideration: Correct corrosion protection plating.
- Accuracy
- Preload
- Lubrication
- Friction
- Operating limits
- Contact geometry
- Load carrying capacity and life
- Design of bearing arrangements
- Fitting
Linear roller bearing and guideway assemblies RUF. D Linear roller bearing and guideway assemblies RUE. D FE: Linear roller bearing and guideway assembly with carriage RWU. D FE with grease lubrication on guideway TSX. D RUE D OE: with carriage RWU. D OE with oil lubrication Carriages RWU. D FE: Compact carriage with cylindrical rollers in four recirculation channels. with grease lubrication RWU. D OE: with carriage RUW. D OE with oil lubrication Guideways TSX. D: Guideway with hardened and ground raceways and loacting faces Variants of linear roller bearing and guideway assemblies. Suffix: Differences from standard executions. ADB: Linear roller bearing and guideway assembly with covering strip ADB, groove in guideway for covering strip. L: Extended carriage H: Narrow carriage with increased section height U: Guideway can be fixed to adjacent construction from below; available on request HL: Extended, narrow carriage with increased section height RRF: Linear recirculating roller bearing and guideway assembly with corrosion- resistant carriage and corrosion- resistant guideway. RRFT: Linear recirculating roller bearing and guideway assembly with corrosion- resistant guideway only. Accessories Standard Accessories KA. TN: Plastic closing plugs MSX. D: Plastic dummy guideway Special Accessories KA. M: Brass closing plugs KA. MM: Brass closing plugs with stud MVH. D: Hydraulic fitting device ADB: Covering Strip1) APLU.D: Sheet Steel wiper RUKS. D: Looking element BPLU. D: Lubrication adapter plate SMDE. D: Minimal quantity lubricant metering unit1) RUDS. D: Damping carriage1) 1) Can also be ordered in conjuction with the linear recirculating roller bearing and guideway assembly.
|
